So you got a Setek extender setup done recently. Before your devices connect to new WiFi we suggest you go for firmware update. Most users prefer doing Setek extender firmware update in order to enhance its performance. However, at times, they come across the firmware update failure issue.
Are you also having a hard time because of the firmware update failed issue? Well then, it is highly suggested that you go through the hacks highlighted in this post. At least one of them will definitely prove to be a helping hand for you.
Let Fix Setek Extender Firmware Update Failure
-
Check the Cable Connections
The primary reason why you are experiencing the issue at hand is because of a lousy internet connection. An unstable internet connection might have been caused because the cable connecting the networking devices is damaged. Thus, replace the damaged cable with a non-damaged one. When you connect your extender to the router using the new cable, make sure that the connection is finger-tight. Doing so will keep you away from further technical issues in the future.
-
Bring the WiFi Devices Closer
In case you are still experiencing the Setek extender firmware update failure issue, then it might be because the distance that is separating your networking devices currently is too much. This is valid if you have made a wireless connection between the extender and router. To take care of the problem, you have got to reduce the distance between them. But, avoid placing them too close to each other. Otherwise, the signals emitted from your networking devices will clash and you will not be able to troubleshoot the Setek extender firmware update failure issue with ease.
-
Download the Right Version
Every Setek wireless range extender has a model number mentioned at its bottom. Surely your networking device would have come with the same. This model number is required while upgrading the firmware of your networking device. In case you entered the wrong model number while downloading the firmware, then it is no shocker why you are stuck with the firmware update failed issue. To take care of the problem, you need to enter the correct model number while downloading the firmware of your wireless range extender.
-
Reboot the Setek Extender
Considering you are walking through this troubleshooting hack; it means that you are still struggling with the same issue. Well then, have you considered rebooting your wireless range extender to handle the situation at hand? No? Well then, you ought to do so now. You will be able to do so by powering off your extender, holding on for some time, and then, powering on your extender. Now, check again if you are able to update the firmware of your Setek range extender this time or if you are still stuck.
-
Do Setek Extender Reset
This is a troubleshooting hack that we usually recommend to users when nothing seems to work for them. It looks like we have to suggest you reset your extender. Now, you might be wondering how to restore your wireless range extender to its default factory values, right? Well, it is quite simple. You just need to press the Reset button located on it and hold on for some time. Once the reset process finishes, your wireless extender will automatically reboot signifying the same. After the reset process, reconfigure your extender. You can opt for using the web interface to perform Setek extender setup without WPS or go for WPS method.
To Conclude
Performing Setek extender firmware update is essential if you want to enhance the performance of your networking device. But, if that is exactly what you are not able to do, then we hope that the aforementioned troubleshooting hacks will be able to help you out.