Netgear Orbi mesh device provide its users several features of networking and internet services
Here, we will share tips and solution to solve any technical problem like router not working, not receiving internet signals, Orbi pink light and blinking red light.
Access Orbi Login Interface via Computer
- You can access the interface with the help of computer or laptop.
- Start with connecting the computer to the router network by LAN cable.
- Choose updated web browser and search the URL orbilogin.net or IP address 192.168.1.1.
- The login page of the interface will load, where you have to enter the admin credentials which you have used at the time of setup.
- Reach to the interface and adjust the settings and networks of Orbi mesh system.
Access Orbi Login Interface via Phone
- At first, you have to download the Orbi app in your phone.
- Just choose App store (if you have iPhone) or Play store (if you have Smartphone).
- Here, you have to search Orbi app and download it in your internet device.
- Then, open the app and enter the credentials like username and password.
- After entering the credentials and clicking on the Log In button, you will access the orbilogin interface in your phone.
Now, let’s see how to troubleshoot interface and router related problems with the help of down given tips and solutions.
Troubleshooting Tips
Check Hardware Connections
Make sure the router is receiving internet through Ethernet cable. The cable must be connected to the correct ports of the modem and router. You should select router WAN port and modem LAN port.
Check Internet Connectivity
The router must receive internet from the modem. To make sure the router is connected to the internet or not, you can see Internet LED on the router. If it is red then router is not connected to internet.
Dispel Network Interruption
Electronic devices are the biggest reasons why your Orbi system network not working because of the internet signals interruptions. So change the location of the router, if you find any electronic devices nearby.
Update Orbi Firmware
It is simple to update Orbi router and satellite firmware version with the help of your computer and some instructions.
- Find settings after accessing the Orbi mesh system interface via orbilogin net
- Select the Firmware tab and search for latest version firmware.
- Download the firmware file and paste it into Firmware tab.
- Then, click on the Install button and reboot the device after update.
Reboot Orbi Mesh System
By rebooting the Orbi mesh system, you can solve several problems like interface is not working of router not receiving internet signal. To restart the device, there are two methods which are given down here.
- Unplug the Orbi mesh router and satellites power cord and plug it again to reboot the whole system.
- Find the power button and press it twice. By pressing it first time router will turn off and pressing it second the device will restart.
Reset Orbi Mesh System
At last, if the problem is not solving by applying all the tips and solutions, then you can factory reset Orbi device. To reset the device, just find the RESET pinhole button and give it a long press. The Orbi settings and data will be cleared out. Then you have to reconfigure the device from accessing the interface.
The Ending Phase
Here, you have seen and learned how to log in to the interface with the help of your computer and phone. We have also shared tips and solutions to make the router performance better.