Netgear Orbi mesh device provide its users several features of networking and internet services. Some of the features are Orbi parent mode, Orbi guest WiFi test deep link, Sync options, Orbi app and much more.
Here, we will share tips and solution to solve any technical problem like router not working, not receiving internet signals, blinking red light. We will share all major tips to fix all mentioned issues.
Troubleshooting Tips and Solutions
Down here, you will get to know how to solve the technical errors related to the Orbi mesh router and satellites.
Use Updated Web Browser
If you are not using an updated browser in your computer to reach the Orbi system interface, then you can face troubles and errors. Update the browser to dispel the problems. To update, just go to the browser settings> About> click Update button.
Check Hardware Connections
Make sure the router is receiving internet through Ethernet cable. The cable must be connected to the correct ports of the modem and router. You should select router WAN port and modem LAN port.
Check Internet Connectivity
The router must receive internet from the modem. To make sure the router is connected to the internet or not, you can see Internet LED on the router. If it is red then router is not connected to internet.
Dispel Network Interruption
Electronic devices are the biggest reasons why your Orbi system network not working because of the internet signals interruptions. So change the location of the router, if you find any electronic devices nearby.
Update Orbi Firmware
It is simple to update Orbi router and satellite firmware version with the help of your computer and some instructions.
- Find settings after accessing the Orbi mesh system interface via orbilogin.net.
- Select the Firmware tab and search for latest version firmware.
- Download the firmware file and paste it into Firmware tab.
- Then, click on the Install button and reboot the device after update.
Reboot Orbi Mesh System
By rebooting the Orbi mesh system, you can solve several problems like interface is not working of router not receiving internet signal. To restart the device, there are two methods which are given down here.
- Unplug the Orbi mesh router and satellites power cord and plug it again to reboot the whole system.
- Find the power button and press it twice. By pressing it first time router will turn off and pressing it second the device will restart.
Reset Orbi Mesh System
At last, if the problem is not solving by applying all the tips and solutions, then you can reset the Orbi device. To reset the device, just find the RESET pinhole button and give it a long press. The Orbi settings and data will be cleared out. Then you have to reconfigure the device from accessing the interface.
How to Reconfigure Orbi Mesh System?
- You have to access the interface with the help of computer or laptop.
- Start with connecting the computer to the router network by LAN cable.
- Choose updated web browser and search the URL orbilogin.net or IP address 192.168.1.1.
- The login page of the interface will load, where you have to enter the admin credentials which you have used at the time of setup.
- Reach to the interface and re-adjust the settings and networks of Orbi mesh system.
Last End Words
Here, you have learned how to troubleshoot technical problems like Orbi router is not working or not receiving internet signals. We have also shared major solutions which are updating firmware version, rebooting the router, and resetting the Orbi device.