Deco mesh system is available in 1 pack, 2 pack, and 3 pack on the stores and online stores. here, you will get to know how to complete the TP-Link Deco setup, which includes physical connection and configuration steps.
We will also provide simple to perform troubleshooting tips and solutions, so that you can easily complete the setup and dispel any technical problems.
TP-Link Deco Installation
You have to connect the deco device (parent node) to your main router or modem. You must use the Ethernet cable. Just find one of deco ports and connect it to the modem LAN port through the Ethernet cable. Now, let’s configure the Deco device with the help of simple instructions.
Download Deco App
To install the Deco app in your phone, you have to go in to the Play store (if you have Smartphone) or App store (if you have iPhone). You have to search for the Deco App and download the app by tapping on the download icon.
Access Interface
After installing the app, you have to open it and enter the admin credentials like username and password. Then, tap the Log In button on the screen, which takes you to the interface window.
Update Deco Firmware
To update the device, you have to use your computer or laptop. Just connect to the router via LAN cable.
- Log in to the interface and select the Settings.
- In the Settings you have to go in to the Firmware tab.
- You will see the current running firmware version in the router.
- Just update it by clicking on the Search and Update button.
Now, you have learned how to setup your TP-Link Deco device, how to configure it by using computer, and how to update the firmware. Down here, you also must learn how to dispel technical issues related to Deco like device is not working or deco flashing red light (internet is not connected).
Tips and Solutions
We will share major four tips and solutions that help you to establish a strong deco network and fix any technical issue.
Check Hardware Connections
Make sure the Deco is receiving internet through Ethernet cable. The cable must be connected to the correct ports of the modem and Deco. You should select Deco port and modem LAN port.
Dispel Network Interruption
Electronic devices are the biggest reasons why your Deco network not working because of the internet signals interruptions. So change the location of the Deco, if you find any electronic devices nearby.
Reboot WiFi Device
By rebooting the Deco device, you can solve several problems like interface is not working of Deco not receiving internet signal. To restart the device, there are two methods which are given down here.
- Unplug the Deco power cord and plug it again in to the wall socket to reboot the whole system.
- Find the power button and press it twice. By pressing it first time Deco will turn off and pressing it second the device will restart.
Reset Deco
At last, if the problem is not solving by applying all the tips and solutions, then you can factory reset Deco device. To reset the device, just find the RESET pinhole button and give it a long press. The Deco settings and data will be cleared out. Then you have to reconfigure the device from accessing the interface through your phone.
You can use these tips and solutions on all the deco models like Deco AX3000 setup or Deco X60 setup as well.
Last Words
Here, you have seen and learned how to setup, configure and update the TP-link deco mesh system. We have also shared troubleshooting tips and solutions, so that you can easily dispel deco device related technical problems.